| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
LTC1682-3.3 Datasheet(PDF) 3 Page - Linear Technology |
|
|
|||||||||||||||||||||||||||||
LTC1682-3.3 Datasheet(HTML) 3 Page - Linear Technology |
|
3 / 12 page ![]() 3 LTC1682/LTC1682-3.3/LTC1682-5 PARAMETER CONDITIONS MIN TYP MAX UNITS CPO (Charge Pump Output) VIN = 1.8V, IOUT = 10mA q 18 30 Ω Output Resistance VIN = 3V, IOUT = 10mA q 13 20 Ω VIN = 4.4V, IOUT = 10mA q 11 17 Ω VOUT Dropout Voltage (Note 3) LTC1682, IOUT = 10mA, VOUT = 2.57V (Note 5) q 100 160 mV LTC1682/LTC1682-3.3, IOUT = 10mA, VOUT = 3.3V q 75 120 mV LTC1682/LTC1682-5, IOUT = 10mA, VOUT = 5V q 50 90 mV VOUT Enable Time IOUT = 10mA 2 ms VOUT Output Noise Voltage LTC1682 IOUT = 10mA, 10Hz ≤ f ≤ 100kHz, VOUT = 5V 88 µVRMS IOUT = 10mA, 10Hz ≤ f ≤ 2.5MHz, VOUT = 5V 800 µVP-P LTC1682-3.3 IOUT = 10mA, 10Hz ≤ f ≤ 100kHz, CFILT = 1nF 58 µVRMS IOUT = 10mA, 10Hz ≤ f ≤ 2.5MHz, CFILT = 1nF 500 µVP-P LTC1682-5 IOUT = 10mA, 10Hz ≤ f ≤ 100kHz, CFILT = 1nF 64 µVRMS IOUT = 10mA, 10Hz ≤ f ≤ 2.5MHz, CFILT = 1nF 600 µVP-P VOUT Line Regulation VIN = 3V to 4V, IOUT = 0mA (Note 6) q 520 mV VOUT Load Regulation IOUT = 1mA to 10mA q 310 mV IOUT = 1mA to 50mA (Note 4) 10 mV VOUT Shutdown Resistance SHDN = 0V, Resistance Measured to Ground, VIN = 1.8V q 150 350 Ω SHDN = 0V, Resistance Measured to Ground, VIN = 4.4V q 50 150 Ω SHDN Input Threshold VIN = 1.8V to 4.4V q 0.4 1 1.6 V SHDN Input Current SHDN = VIN q –1 1 µA SHDN = 0V q –1 1 µA Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Note 2: The LTC1682C is guaranteed to meet specified performance from 0 °C to 70°C and is designed, characterized and expected to meet these extended temperature limits, but is not tested at – 40 °C and 85°C. The LTC1682I is guaranteed to meet the extended temperature limits. Note 3: Dropout voltage is the minimum input/output voltage required to maintain regulation at the specified output current. In dropout the output voltage will be equal to: VCPO – VDROPOUT (see Figure 4). Note 4: Operating conditions are limited by maximum junction temperature. The regulated output specification will not apply for all possible combinations of input voltage and output current. When operating at maximum input voltage, the output current range may be limited. When operating at maximum output current, the input voltage range may be limited. Note 5: Limited by the LDO disable switch point of 1.45VIN. Note 6: The LTC1682 is set to 5V. The feedback current is 25 µA. The q denotes specifications that apply over the full operating temperature range, otherwise specifications are TA = 25°C. SHDN = VIN = 3V; C1 = 0.22µF; C2, C3, C4 = 4.7µF, unless otherwise noted. ELECTRICAL CHARACTERISTICS |
|
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |