Rev. 7a

Aluminum Electrolytic Capacitors

Capacitor lead wire is dipping into the oven, and then, dipping in 245±3

℃, solder liquid for 3±0.5 seconds, the substance is above the

liquid solder 2mm, the dipping lead must be adherent 95% fresh tin at least.

Put capacitor lead wire to dip 260±5

℃ in solder liquor away the body 2mm, after 10±1 seconds taken out, after 2 hours in room

temperature, should do final measurements, the values are following:

(A) Capacitance change:

≦ ±10% of initial value

(B) Dissipation factor:

≦ initial specified value

(C) Leakage current:

≦ initial specified value

(D) Visual: No damage