DP8422A datasheet(39/58 Pages) NSC

No. de pieza	DP8422A

Descripción Electrónicos	microCMOS Programmable 256k/1M/4M Dynamic RAM Controller/Drivers

PDF	58 Pages

Scroll/Zoom	100%

Fabricante Electrónico	NSC [National Semiconductor (TI)]

Página de inicio	http://www.national.com

Logo

39 / 58 page

100 Dual Accessing (DP8422A) (Continued)

Since the DP8422A has only one set of address inputs the

signal is used with the addition of buffers to allow the cur-

rently granted port’s addresses to reach the DP8422A The

signals which need to be bufferred are R0 – 10 C0 – 10

B0 – 1 ECAS0–3 WE and LOCK All other inputs are not

common and do not have to be buffered as shown in

Figure

34a If a Port which is not currently granted tries to access

the DRAM array the GRANTB output will transition from a

rising clock edge from AREQ or AREQB negating and will

precede the RAS for the access by one or two clock peri-

ods GRANTB will then stay in this state until the other port

requests an access and the currently granted port is not

accessing the DRAM as shown in

Figure 34b

TLF8588 – 55

If Port B is synchronous the Request Synchronizing logic will not be required

FIGURE 34a Dual Accessing with the DP8422A (System Block Diagram)

DP8422A Datasheet(PDF) 39 Page - National Semiconductor (TI)