MSP430C413IPM datasheet(10/55 Pages) TI

10 / 55 page

MSP430x41x

MIXED SIGNAL MICROCONTROLLER

SLAS340G − MAY 2001 − REVISED JUNE 2004

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

operating modes

The MSP430 has one active mode and five software selectable low-power modes of operation. An interrupt

event can wake up the device from any of the five low-power modes, service the request and restore back to

the low-power mode on return from the interrupt program.

The following six operating modes can be configured by software:

D Active mode AM;

−

All clocks are active

D Low-power mode 0 (LPM0);

−

CPU is disabled

ACLK and SMCLK remain active, MCLK is available to modules

FLL+ Loop control remains active

D Low-power mode 1 (LPM1);

−

CPU is disabled

ACLK and SMCLK remain active, MCLK is available to modules

FLL+ Loop control is disabled

D Low-power mode 2 (LPM2);

−

CPU is disabled

MCLK and FLL+ loop control and DCOCLK are disabled

DCO’s dc-generator remains enabled

ACLK remains active

D Low-power mode 3 (LPM3);

−

CPU is disabled

MCLK, FLL+ loop control, and DCOCLK are disabled

DCO’s dc-generator is disabled

ACLK remains active

D Low-power mode 4 (LPM4);

−

CPU is disabled

ACLK is disabled

MCLK, FLL+ loop control, and DCOCLK are disabled

DCO’s dc-generator is disabled

Crystal oscillator is stopped

MSP430C413IPM Datasheet(PDF) 10 Page - Texas Instruments

MSP430C413IPM Datasheet(HTML) 10 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

Datasheet Descarga

Enlace URL