HCS500T-ISLASHST datasheet(18/42 Pages) MICROCHIP

18 / 42 page

HCS500

DS40000153E-page 18

 2001-2015 Microchip Technology Inc.

6.0

KEY GENERATION

The HCS500 supports three learning schemes which are selected during the initialization of the system EEPROM. The

learning schemes are:

• Normal learn using the KEELOQ decryption algorithm

• Secure learn using the KEELOQ decryption algorithm

• Secure learn using the XOR algorithm

6.1

Normal (Serial Number derived) Learn using the KEELOQ Decryption Algorithm

This learning scheme uses the KEELOQ decryption algorithm and the 28-bit serial number of the transmitter to derive

the crypt key. The 28-bit serial number is patched with predefined values as indicated below to form two 32-bit seeds.

SourceH = 60000000 00000000H + Serial Number | 28 Bits

SourceL = 20000000 00000000H + Serial Number | 28 Bits

Then, using the KEELOQ decryption algorithm and the manufacturer’s code the crypt key is derived as follows:

KeyH Upper 32 bits = F KEELOQ Decryption (SourceH) | 64-Bit Manufacturer’s Code

KeyL Lower 32 bits = F KEELOQ Decryption (SourceL) | 64-Bit Manufacturer’s Code

6.2

Secure (Seed Derived) Learn using the KEELOQ Decryption Algorithm

This scheme uses the secure seed transmitted by the encoder to derive the two input seeds. The decoder always uses

the lower 64 bits of the transmission to form a 60-bit seed. The upper four bits are always forced to zero.

For 32-bit seed encoders (HCS200, HCS201, HCS300, HCS301):

SourceH = Serial Number Lower 28 bits

SourceL = Seed 32 bits

For 48-bit seed encoders (HCS360, HCS361):

SourceH = Serial Number (with upper four bits set to zero) Upper 16 bits <<16 + Seed Upper 16 bits

SourceL = Seed Lower 32 bits

For 60-bit seed encoders (HCS362, HCS365, HCS370, HCS410, HCS412, HCS473):

SourceH = Seed Upper 32 bits (with upper four bits set to zero)

SourceL = Seed Lower 32 bits

The KEELOQ decryption algorithm and the manufacturer’s code is used to derive the crypt key as follows:

KeyH Upper 32 bits = Decrypt (SourceH) 64 Bit Manufacturer’s Code

KeyL Lower 32 bits = Decrypt (SourceL) 64 Bit Manufacturer’s Code

6.3

Secure (Seed Derived) Learn using the XOR Algorithm

This scheme uses the seed transmitted by the encoder to derive the two input seeds. The decoder always use the lower

64 bits of the transmission to form a 60-bit seed. The upper four bits are always forced to zero.

For 32-bit seed encoders (HCS200, HCS201, HCS300, HCS301):

SourceH = Serial Number Lower 28 bits

SourceL = Seed 32 bits

For 48-bit seed encoders (HCS360/HCS361):

SourceH = Serial Number (with upper four bits set to zero) Upper 16 bits <<16 + Seed Upper 16 bits

SourceL = Seed Lower 32 bits

For 60-bit seed encoders (HCS362, HCS365, HCS370, HCS410, HCS412, HCS473):

SourceH = Seed Upper 32 bits with upper four bits set to zero

SourceL = Seed Lower 32 bits

Then, using the manufacturer’s code the crypt key is derived as follows:

KeyH Upper 32 bits = SourceH XOR 64-Bit Manufacturer’s Code Upper 32 bits

KeyL Lower 32 bits = SourceL XOR 64-Bit Manufacturer’s Code Lower 32 bits

HCS500T-I/ST Datasheet(PDF) 18 Page - Microchip Technology

HCS500T-I/ST Datasheet(HTML) 18 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Datasheet Descarga

Enlace URL