CGS702V datasheet(2/10 Pages) NSC

No. de pieza	CGS702V

Descripción Electrónicos	Commercial Low Skew PLL 1 to 9 CMOS Clock Driver with Improved EMI

PDF	10 Pages

Scroll/Zoom	100%

Fabricante Electrónico	NSC [National Semiconductor (TI)]

Página de inicio	http://www.national.com

Logo

2 / 10 page

General Description (Continued)

Also included are two EXTSEL and EXTCLK pins to allow

testing the chip via an external source The EXTSEL pin

once set to high

causes the External-Clock

Mux to

change its input from the output of the VCO and Counter to

the external clock signal provided via EXTCLK input pin

CLK1SEL pin changes the output frequency of the CLK1

06 outputs During normal operation when CLK1SEL pin is

high these outputs are at the same frequency as the input

crystal oscillator while CLK2 and CLK4 outputs are at twice

and four times the input frequency respectively

Once CLK1SEL pin is set to a low logic level the CLK1

outputs will be at twice the input frequency the same as the

CLK2 output with CLK4 output still being at four times the

input frequency

In addition two other pins are added for increasing the test

capability SKWSEL and SKWTST pins allow testing of the

counter’s output and skew of the output drivers by bypass-

ing the VCO In this test mode CLK4 frequency is the same

as SKWTST input frequency while CLK2 is

and CLK1

frequencies are

respectively (refer to the truth table) In

addition CLK1SEL functionality is also true under this test

condition

Block Diagram

TLF12386 – 2

CGS702V Datasheet(PDF) 2 Page - National Semiconductor (TI)