117

Dimensions are shown for

reference purposes only.

Dimensions are in inches over

(millimeters) unless otherwise

specified.

Catalog 1308242

Issued 3-03 (PDF Rev. 12-08)

Specifications and availability

subject to change.

www.tycoelectronics.com

Technical support:

Refer to inside back cover.

W31-X2M1G-1

W31-X2M1G-2

W31-X2M1G-3

W31-X2M1G-5

W31-X2M1G-7.50

W31-X2M1G-10

W31-X2M1G-15

W31-X2M1G-20

W31-X2M1G-25

W31-X2M1G-30

W31-X2M1G-35

W31-X2M1G-40

W31-X2M1G-50

W23-X1A1G-1

W23-X1A1G-2

W23-X1A1G-3

W23-X1A1G-5

W23-X1A1G-7.50

W23-X1A1G-10

W23-X1A1G-15

W23-X1A1G-20

W23-X1A1G-25

W23-X1A1G-30

W23-X1A1G-35

W23-X1A1G-40

W23-X1A1G-50

Stock Items – Authorized distributors are more likely to stock the following items.

Ordering Information

Stock Items – Authorized distributors are more likely to stock the following items.

Typical Part No.

B

B

W

31

-X

2M1

G

-5

1. Designator:

W = Circuit breaker

2. Series Number:

31 = Single pole, toggle actuator

3. Circuit Function:

X = Series trip

4. Mounting Bushing:

1 = 15/32”-32 threaded bushing .320” (8.13mm) long, round, silver color

2 = 15/32”-32 threaded bushing .320” (8.13mm) long, double “D”

, silver color

5. Toggle:

M = Silver color metal toggle, round, with amp rate marking on end

6. Terminals (See drawing for relative terminal positions):

1 = Screw terminals situated 90° to each other with #8-32 screws and washers installed.

5 = Screw terminals situated parallel to each other pointing downward with #8-32 screws and washers installed.

7. Mounting Hardware:

A = Knurled nut/hex nut intalled

G = Two hex nuts/lockwasher installed

Z = No mounting hardware supplied

8. Amp Rating:

0.5

3

7.5

20

35

1

4

10

25

40

2

5

15

30

50

Ordering Information

Typical Part No.

B

B

W

23

-X

1A1

G

-5

1. Designator:

W = Circuit breaker

2. Series Number:

23 = Single pole, push/pull

3. Circuit Function:

X = Series trip

4. Button:

1 = Black with white amp rate marking and white trip band.

5. Mounting Bushing:

A = 3/8”-24 threaded bushing .375” (9.53mm) long, silver color

6. Terminals (See drawings for relative terminal positions):

1 = Screw terminals situated 90° to each other with #8-32 screws and washers installed.

3 = Screw terminals situtated parallel to each other pointing upward with #8-32 screws and washers installed.

7. Mounting Hardware:

A = Knurled nut/hex nut installed

G = Two hex nuts/lockwasher installed

Z = No mounting hardware supplied

8. Amp Rating:

0.5

3

7.5

20

35

1

4

10

25

40

2

5

15

30

50