 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
ATtiny11 Datasheet(PDF) 51 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
ATtiny11 Datasheet(HTML) 51 Page - ATMEL Corporation |
|
|
51 / 61 page  AVR STK500 User Guide 6-1 Rev. 1925C–AVR–3/03 Section 6 In-System Programming of an External Target System The STK500 can be used as a programmer to program AVR devices in other applica- tions. There are two different ISP connector pinouts available: a 6-pin and a 10-pin version. Both are supported by STK500. Figure 6-1. 6-pin ISP Connector Pinout Figure 6-2. 10-pin ISP Connector Pinout Select the device to be programmed in the same way as programming a device on the STK500. The V CC of the target application is detected by STK500 and signals are con- verted into voltage levels suitable for the target system. Note: If the other application has its own power supply to VTG, the jumper VTARGET must be removed before connecting STK500 to the other application. STK500 may be damaged if the VTARGET jumper is not removed. VTG MOSI GND MISO SCK RST 1 2 ISP6PIN VTG GND GND GND GND MOSI NC RST SCK MISO 1 2 ISP10PIN |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Mexican ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
