YR80.241

Y-Series

9. EMC

The redundancy module is suitable for applications in industrial environment as well as in residential, commercial and

light industry environment without any restrictions. A detailed EMC report is available on request.

EMC Immunity

According generic standards: EN 61000-6-1 and EN 61000-6-2

Electrostatic discharge

EN 61000-4-2

Contact discharge

Air discharge

8kV

15kV

Criterion A

Criterion A

Electromagnetic RF field

EN 61000-4-3

80MHz-2.7GHz

20V/m

Criterion A

Fast transients (Burst)

EN 61000-4-4

Input lines

Output lines

2kV

2kV

Criterion A

Criterion A

Surge voltage on input

lines

EN 61000-4-5

+

-

+/-

Chassis ground

500V

1kV

Criterion A

Criterion A

Surge voltage on output

lines

EN 61000-4-5

+

-

+/-

Chassis ground

500V

1kV

Criterion A

Criterion A

Conducted disturbance

EN 61000-4-6

0.15-80MHz

20V

Criterion A

Power-frequency magnetic

field *)

EN 61000-4-8

50Hz

30A/m

Criterion A

Criterions:

A:

Redundancy module shows normal operation behavior within the defined limits.

Notes:

*)

A test is not applicable according to EN 61000-6-2, since the device does not contain components susceptible to magnetic fields, e.g. hall

elements, electrodynamic microphones, etc.

EMC Emission

According generic standards: EN 61000-6-3 and EN 61000-6-4

Conducted emission

IEC/CISPR 16-1-2, IEC/CISPR 16-2-1

limits for DC power ports according

Radiated emission

EN 55011, EN 55022

Class B

This device complies with FCC Part 15 rules.

Operation is subjected to following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

*)

For information only, not mandatory for EN 61000-6-3. Provided, that power sources connected on the inputs fulfill the requirements too.

Switching frequency

The internal auxiliary supply is generated with a boost converter.

The switching frequency is typ. 16kHz.

Feb. 2014 / Rev. 1.3 DS-YR80.241-EN

All parameters are specified at 24V, 80A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted

www.pulspower.com Phone +49 89 9278 0

Germany

9/17