SPE-17-8-035/A

Page 2 of 18

1. Introduction

The MCS6.A is a low profile SMD CAT M1 Bands / 4G/3G/2G embedded antenna

designed for direct SMD mount on a device PCB. It provides high efficiency in a very

small form factor of just 42*10*3mm.

Category (CAT) M1 is a low power wide area (LPWA) technology specifically designed

for IoT and M2M. CAT M1 technology offers lower maintenance cost, with greater

efficiency and reliability by reducing power consumption and providing deeper

penetration compared to standard cellular technologies. It operates on secure mobile

networks making it suited to automotive, smart meter, medical and smart city

applications.

If tuning is required the MCS.06 can be tuned for the device environment, while there

is no need for new tooling. Its rectangular shape and very small size makes it very

easy to integrate – packaged in tape and reel, it can be mounted via pick and place to

reflow solder directly on the edge of the PCB board. This antenna is recommended to

be used with longer ground-plane lengths of 120mm or more to attain its highest rated

efficiency. Note the return loss and efficiency graphs on page 16.

Contact Taoglas local regional sales office for quick and professional support from our

senior engineering team on integration and matching of the antenna to your device.