 Flexible 1.8V, 2.5V, 3.3V power rails
 High-performance, low phase noise PLL, < 0.5ps RMS typical phase jitter on outputs
 Four banks of internal OTP memory
— In-system or factory programmable
 I2C serial programming interface
— 0xD0 or 0xD4 I2C address options allow multiple devices configured in the same system.
 Reference LVCMOS output clock
 Three Universal configurable outputs (OUT1, 2, 4):
— Differential (LVPECL, LVDS, or HCSL)
1kHz to 350MHz
— Two single-ended (in-phase or 180 degrees out of phase)
1kHz to 200MHz
— I/O VDDs can be mixed and matched, supporting 1.8V (LVDS and LVCMOS), 2.5V, or 3.3V
— Independent spread spectrum on each output pair
 Four additional LPHCSL outputs (OUT 3, 5, 6, 7)
— 1.8V low power supply
— 1kHz to 200MHz
 Programmable output enable or power-down mode
 Available in 5 × 5 mm 40-VFQFPN package
 -40° to +85°C industrial temperature operation