| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
MP2326GD Datasheet(PDF) 3 Page - Monolithic Power Systems |
|
|
|||||||||||||||||||||||||||||
MP2326GD Datasheet(HTML) 3 Page - Monolithic Power Systems |
|
3 / 25 page ![]() MP2326 – 19V, 4A, LOW IQ STEP-DOWN CONVERTER MP2326 Rev. 1.1 www.MonolithicPower.com 3 1/28/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. ABSOLUTE MAXIMUM RATINGS (1) VIN .............................................................. +21V VSW...–0.3V (-5V<10ns) to VIN+0.3V (23V<10ns) VBST ........................................................ VSW+6V All Other Pins.............................. –0.3V to +6V(2) Continuous Power Dissipation (3) QFN-14 (2mmx3mm) ................................. 1.8W Junction Temperature.............................+150oC Lead Temperature ..................................+260oC Storage Temperature................-65oC to +150oC Recommended Operating Conditions (4) Supply Voltage VIN ...........................3.9V to 19V Output Voltage VOUT............. 0.6V to VIN*DMAX (5) Operating Junction Temp. ....... -40°C to +125°C Thermal Resistance (6) θJA θJC QFN-14 (2mmx3mm)…………70……15…°C/W Notes: 1) Exceeding these ratings may damage the device 2) Please refer to the “Enable Control” section on page 15 for the ABS MAX rating of EN. 3) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-to- ambient thermal resistance θJA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (MAX)-TA)/θJA. Exceeding the maximum allowable power dissipation produces an excessive die temperature, causing the regulator to go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 4) The device is not guaranteed to function outside of its operating conditions. 5) For details about the Dmax, see the “Application when Input Voltage is Close to Output Voltage” section on page 13 for more information. 6) Measured on JESD51-7, 4-layer PCB. |
|
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |