[2SMPB-02E] Datasheet Rev.05(Jun.,2017)

23

Copyright 2017 OMRON Corporation. All Rights Reserved.

(2) Environmental conditions for transport and storage

1)

The product shall not be kept with corrosive gases (e.g. organic solvents gases, sulfur dioxide and hydrogen sulfide gases).

2)

The products are not water proof. The product shall be kept dry during storage.

3)

The outer box strength may be degraded depending on the storage conditions. Please use the product in order.

4)

For this product, please keep away from direct sunlight or ultraviolet rays.

5)

The product shall be kept in appropriate conditions of temperature and humidity.

6)

The product shall not be kept under dusty or damp condition.

8. Warranty and Limited Warranty

(1) Definition

The definition of terms used in these Terms and Conditions are as follows:

1)

Usage conditions: Usage conditions, rating, performance, operating environment, handling instructions, cau-

tions, prohibited use, etc. of Omron products described in specifications, documentations or manuals.

2)

Customer application: Application of Omron products by customers which include embedding and/or using

Omron products in their parts/components, electronic substrates, devices, equipment or systems manufactured

by customers.

3)

Fitness: (a) performance, (b) non-infringement of third-party intellectual property, (c) compliance with laws

and regulations and (d) conformity to various standards.

(2) Caution on Descriptions

Attention is required to the following points on descriptions in specifications.

1)

Rated values and performance values are the product of tests performed for separate single conditions, includ-

ing but not limited to temperature and humidity.

It is not intended to warrant rated values and performance

values for multiple combined conditions.

2)

Reference data are provided for reference only. Omron does NOT warrant that Omron products work properly

at all time in the range of reference data.

3)

Application examples are provided for reference only. Omron does NOT warrant the Fitness of Omron prod-

ucts under such application.

4)

Omron may discontinue the production of Omron products or change the specifications of them for the purpose

of improving such products or other reasons entirely at its own discretion.

(3) Precautions

Please be aware of and accept the following when you introduce or use Omron products:

1)

Please use Omron products in compliance with usage conditions including rating and performance.

2)

Please confirm fitness of Omron products in your application and use your own judgment to determine the ap-

propriateness of using them in such application. Omron shall not warrant the fitness of Omron products in cus-

tomer application.

3)

Please confirm that Omron products are properly wired and installed for their intended use in your overall sys-

tem.

4)

When using Omron products, please make sure to (i) maintain a margin of safety vis-à-vis the published rated

and performance values, (ii) design to minimize risks to customer application in case of failure of Omron

products, such as introducing redundancy, (iii) introduce system-wide safety measures to notify risks to users,

and (iv) conduct regular maintenance on Omron products and customer application.

5)

Omron products are designed and manufactured as general-purpose products for use in general industrial

products.

They are not intended to be used in the following applications.

If you are using Omron products

in the following applications, Omron shall not provide any warranty for such Omron products.

(a)

Applications with stringent safety requirements, including but not limited to nuclear power control

equipment, combustion equipment, aerospace equipment, railway equipment, elevator/lift equipment,

amusement park equipment, medical equipment, safety devices and other applications that could cause

danger/harm to people’s body and life.

(b) Applications that require high reliability, including but not limited to supply systems for gas, water and

electricity, etc., 24 hour continuous operating systems, financial settlement systems and other applications

that handle rights and property.

(c)

Applications under severe condition or in severe environment, including but not limited to outdoor

equipment, equipment exposed to chemical contamination, equipment exposed to electromagnetic inter-

ference and equipment exposed to vibration and shocks

(d) Applications under conditions and environment not described in specification