| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
FSXXXSP Datasheet(PDF) 4 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
FSXXXSP Datasheet(HTML) 4 Page - List of Unclassifed Manufacturers |
|
4 / 52 page ![]() 32 Control transformers SECTION 1 recommendations for overcurrent protection secondary The overcurrent protection listed below, in amperes, is 125% of the rated current of the transformer. Choose the next higher fuse rating if these numbers do not correspond with standard fuse selections. north American standards, including Ul 508, national Electric Code 450 and the Canadian Electrical Code Part I, require overcurrent protection on all control circuit transformers. There are two options for overcurrent protection: option 1 Provide an overcurrent device in the primary circuit rated to the current of the transformer. The overcurrent limits are as follows: Primary 9 amps or more: no more than 125% of rated current. Primary 2 to 9 amps: no more than 167% of rated current. Primary less than 2 amps: no more than 300% of rated current for power circuits. no more than 500% of rated current for control circuits. This method is considered less desirable as start-up inrush to the transformer can frequently surpass the current rating of the device and result in nuisance interruptions. option 2 The second option is to install overcurrent devices in both the primary and secondary circuits of the transformer. In this option, the secondary device must be rated no more than 125% of rated current of the transformer and the primary no more than 250%. CEC permits 300% overcurrent on the primary for this option. In both options listed, it is recommended that time delay fuses be considered to avoid unnecessary interruptions. ul and Csa (nortH amerICan) standards sec. Voltage Va rating 25 50 75 100 150 200 250 300 350 500 750 1000 1500 2000 3000 5000 12 2.7 5.3 7.9 11 16 21 27 - - - - - - - - - 24 1.4 2.7 4.0 5.3 7.9 11 14 16 19 27 - - - - - - 90 0.4 0.7 1.1 1.4 2.1 2.8 3.5 4.2 4.9 7.0 11 14 21 28 - - 95 0.4 0.7 1.0 1.4 2.0 2.7 3.3 4.0 4.7 6.6 9.9 14 20 27 - - 100 0.4 0.7 1.0 1.3 1.9 2.5 3.2 3.8 4.4 6.3 9.4 13 19 25 - - 110 0.3 0.6 0.9 1.2 1.8 2.3 2.9 3.5 4.0 5.7 8.6 12 18 23 - - 115 0.3 0.6 0.9 1.1 1.7 2.2 2.8 3.3 3.9 5.5 8.2 11 17 22 - - 120 0.3 0.6 0.8 1.1 1.6 2.1 2.7 3.2 3.7 5.3 7.9 11 16 21 - - 220 0.15 0.3 0.5 0.6 0.9 1.2 1.5 1.8 2.0 2.9 4.3 5.7 8.6 12 18 29 230 0.14 0.3 0.5 0.6 0.9 1.1 1.4 1.7 2.0 2.8 4.1 5.5 8.2 11 17 28 240 0.14 0.3 0.4 0.6 0.8 1.1 1.4 1.6 1.9 2.7 4.0 5.3 7.9 11 16 27 © Hammond Power Solutions Inc. Data subject to change without notice. |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |