ADC3910CSSS datasheet(34/47 Pages) TI

No. de pieza	ADC3910CSSS

Descripción Electrónicos	ADC3908Dx and ADC3908Sx 8-bit, 25 to 125MSPS Low Latency, Low Power, Small, Single and Dual Channel ADC with Integrated Input Buffers

PDF	47 Pages

Scroll/Zoom	100%

Fabricante Electrónico	TI [Texas Instruments]

Página de inicio	http://www.ti.com

Logo

34 / 47 page

8.2 Initialization Set Up

After power-up, the internal registers must be initialized to their default values through a hardware reset by

applying a high pulse on the RESET pin.

1. Apply AVDD and IOVDD (no specific sequence required). After AVDD is applied the internal band gap

reference powers up and settle out in approximately 2ms.

2. Apply hardware reset. After hardware reset is released, the default registers are loaded from internal fuses

and the internal power up calibration is initiated. The calibration takes approximately 2,000 clock cycles.

3. Begin programming using the device control pins.

ADC3908D025, ADC3908D065, ADC3908D125

ADC3908S025, ADC3908S065, ADC3908S125

SBASAU9 – OCTOBER 2024

www.ti.com

Submit Document Feedback

Product Folder Links: ADC3908D025 ADC3908D065 ADC3908D125 ADC3908S025 ADC3908S065 ADC3908S125

ADC3910CSSS Datasheet(PDF) 34 Page - Texas Instruments