8

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SECTION 2- AIR PURIFYING RESPIRATOR

CHARGING THE BATTERY

Remove the battery from the blower

assembly and connect the charging cable

from the terminal to a mains socket.

DO NOT allow the battery to get wet.

DO NOT attempt to open the battery

case.

Keep the battery away from fire or heat.

Charge the battery before first use.

INSTALLING THE BATTERY

Push the battery into the blower body

until it snaps into position.

1. Battery

2. Battery lock

INSTALLING THE AIR FILTER

Install the HEPA filter into blower body.

Install the foam pre-filter

above the HEPA filter. Push

down on the cover until it

c1icks into position.

1. Blower body

2. HEPA filter

3. Foam pre-filter

4. Filter screen

5. Cover

DO NOT use the respirator without the cover, foam pre-filter and HEPA filter installed.

Replace a damaged or dirty filter.