AT25DF321 datasheet(10/37 Pages) ATMEL

10 / 37 page

3669A–DFLASH–07/07

AT25DF321

Figure 8-1.

Byte Program

Figure 8-2.

Page Program

8.2

Block Erase

A block of 4K-, 32K-, or 64K-bytes can be erased (all bits set to the logical “1” state) in a single

operation by using one of three different opcodes for the Block Erase command. An opcode of

20h is used for a 4K-byte erase, an opcode of 52h is used for a 32K-byte erase, and an opcode

of D8h is used for a 64K-byte erase. Before a Block Erase command can be started, the Write

Enable command must have been previously issued to the device to set the WEL bit of the Sta-

tus Register to a logical “1” state.

To perform a Block Erase, the CS pin must first be asserted and the appropriate opcode (20h,

52h, or D8h) must be clocked into the device. After the opcode has been clocked in, the three

address bytes specifying an address within the 4K-, 32K-, or 64K-byte block to be erased must

be clocked in. Any additional data clocked into the device will be ignored. When the CS pin is

deasserted, the device will erase the appropriate block. The erasing of the block is internally

self-timed and should take place in a time of t

BLKE.

Since the Block Erase command erases a region of bytes, the lower order address bits do not

need to be decoded by the device. Therefore, for a 4K-byte erase, address bits A11-A0 will be

ignored by the device and their values can be either a logical “1” or “0”. For a 32K-byte erase,

address bits A14-A0 will be ignored, and for a 64K-byte erase, address bits A15-A0 will be

ignored by the device. Despite the lower order address bits not being decoded by the device, the

complete three address bytes must still be clocked into the device before the CS pin is deas-

serted, and the CS pin must be deasserted on an even byte boundary (multiples of eight bits);

otherwise, the device will abort the operation and no erase operation will be performed.

SCK

MSB

00000010

410 11

812

37 38

31 32

29 30

OPCODE

HIGH-IMPEDANCE

AAAA

AAA

MSB

DDDDDDD

ADDRESS BITS A23-A0

DATA IN

SCK

MSB

00000010

839

37 38

31 32

29 30

OPCODE

HIGH-IMPEDANCE

AAA

MSB

DDDDDDD

ADDRESS BITS A23-A0

DATA IN BYTE 1

MSB

DDDDDDD

DATA IN BYTE n

AT25DF321 Datasheet(PDF) 10 Page - ATMEL Corporation

AT25DF321 Datasheet(HTML) 10 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Datasheet Descarga

Enlace URL