MPXA6400AP datasheet(2/11 Pages) FREESCALE

2 / 11 page

MPXH6400A

Sensors

Freescale Semiconductor

Pressure

OPERATING CHARACTERISTICS

(VS = 10 Vdc, TA = 25°C unless otherwise noted, P1 > P2)

Characteristic

Symbol

Min

Typ

Max

Unit

Pressure Range

POP

—

400

kPa

Supply Voltage(1)

4.64

5.0

5.36

Vdc

Supply Current

—

6.0

mAdc

Minimum Pressure Offset

(0 to 85

°C)

@ VS = 5.0 Volts

(2)

Voff

0.133

0.2

0.267

Vdc

Full Scale Output

(0 to 85

°C)

@ VS = 5.0 Volts

(3)

VFSO

4.733

4.8

4.866

Vdc

Full Scale Span

(0 to 85

°C)

@ VS = 5.0 Volts

(4)

VFSS

4.467

4.6

4.733

Vdc

Accuracy(5)

(0 to 85

°C)

———

±1.5

%VFSS

Sensitivity

V/P

—

12.1

—

mV/kPa

Response Time(6)

—1.0

—

Warm-Up Time(7)

——

—

Offset Stability(8)

——

±0.25

—

%VFSS

1. Device is ratiometric within this specified excitation range.

2. Offset (Voff) is defined as the output voltage at the minimum rated pressure.

3. Full Scale Output (VFSO) is defined as the output voltage at the maximum or full rated pressure.

4. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the

minimum rated pressure.

5. Accuracy is the deviation in actual output from nominal output over the entire pressure range and temperature range as a percent of span

at 25

°C due to all sources of error including the following:

Linearity:Output deviation from a straight line relationship with pressure over the specified pressure range.

Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and

from the minimum or maximum operating temperature points, with zero differential pressure applied.

Pressure Hysteresis: Output deviation at any pressure within the specified range, when this pressure is cycled to and from the minimum or

maximum rated pressure, at 25

°C.

TcSpan: Output deviation over the temperature range of 0 to 85

°C, relative to 25°C.

TcOffset: Output deviation with minimum rated pressure applied, over the temperature range of 0 to 85

°C, relative to 25°C.

Variation from Nominal: The variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS, at 25°C.

6. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a

specified step change in pressure.

7. Warm-up Time is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized.

8. Offset Stability is the product's output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.

MPXA6400AP Datasheet(PDF) 2 Page - Freescale Semiconductor, Inc

MPXA6400AP Datasheet(HTML) 2 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11

Datasheet Descarga

Enlace URL