INTEDG datasheet(150/478 Pages) MICROCHIP

150 / 478 page

PIC16(L)F1946/47

DS41414D-page 150

 2010-2012 Microchip Technology Inc.

U-0

R/W-1/1

U-0

—

ANSG4

ANSG3

ANSG2

ANSG1

—

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

u = Bit is unchanged

x = Bit is unknown

-n/n = Value at POR and BOR/Value at all other Resets

‘1’ = Bit is set

‘0’ = Bit is cleared

bit 7-5

Unimplemented: Read as ‘0’.

bit 4-1

ANSG<4:1>: Analog Select between Analog or Digital Function on Pins RG<4:0>, respectively

0 = Digital I/O. Pin is assigned to port or digital special function.

1 = Analog input. Pin is assigned as analog input(1). Digital input buffer disabled.

bit 0

Unimplemented: Read as ‘0’.

Note 1:

When setting a pin to an analog input, the corresponding TRIS bit must be set to Input mode in order to

allow external control of the voltage on the pin.

U-0

R/W-1/1

U-0

—

—WPUG5

—

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

u = Bit is unchanged

x = Bit is unknown

-n/n = Value at POR and BOR/Value at all other Resets

‘1’ = Bit is set

‘0’ = Bit is cleared

bit 7-6

Unimplemented: Read as ‘0’.

bit 5

WPUG5: Weak Pull-up Register bits

1 = Pull-up enabled

0 = Pull-up disabled

bit 4-0

Unimplemented: Read as ‘0’.

Note 1:

Global WPUEN bit of the OPTION_REG register must be cleared for individual pull-ups to be enabled.

The weak pull-up device is automatically disabled if the pin is in configured as an output.

INTEDG Datasheet(PDF) 150 Page - Microchip Technology

INTEDG Datasheet(HTML) 150 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL