WL

WL

34

Sensor I/O Connector Models

A reduction in the amount of wiring and parts makes maintenance easy and reduced wiring mistakes, in addition it’s already compact size for

fitting into areas of limited space.

Ordering Information

Item

Standard

Overtravel

High sensitivity

Actuators

Rotating lever

Yes

Yes

Yes

Plunger

Yes

---

---

Load

Standard load (SPST-NO/SPST-NC)

Yes

Microload (SPST-NO/SPST-NC)

Yes

High-precision models WL-j55

Yes

Spatter-prevention models (See note 3.)

Yes

Lamp

Yes

Note: 1. Standard Models: For standard models only one-side operation at an angle of 45_ is possible.

Overtravel Models: Only one-side operation at an angle of 80_ is possible. One-side operation only is not possible.

High-precision Models: Only one-side operation at an angle of 45_ is possible, and pretravel (PT) is 5_, as opposed to 15_ for stan-

dard models.

2. For information other than that listed at the above, contact your OMRON representative.

3. The spatter-prevention models are only available as pre-wired connectors.

Models

Direct-wired Connectors

Type

2-core (NO)

4-core

Lamp-equipped

WLj-LDK13

WLj-LDK43

Double-seal

WLj-55LDK13

WLj-55LDK43

Note: 1. In the model number, j indicates the actuator number.

For example, Overtravel Model WLG2-LDK13.

2. The lamp is set to “light-ON when not operating” (NO

connection).

Pre-wired Connectors

Type

2-core (NO)

2-core (NC)

4-core

3-core (NO)

Lamp-equipped

WLj-LD-M1J

WLj-LD-M1JB

WLj-LD-DGJ03

WLj-LD-DK1EJ03

Double-seal

WLj-55LD-M1J

WLj-55LD-M1JB

WLj-55LD-DGJ3

WLj-55LD-DK1EJ03

Note: 1. In the model number, j indicates the actuator number. For example, Overtravel Model WLG2

-LD-M1J.

2. The lamp is set to “light-ON when not operating” (NO connection).

Model Number Legend

WL -

-

LD

12

34

1. Electrical Rating

Blank: Standard

01:

Microload

2. Actuator Type

CA2: Roller lever: Standard

GCA2: Roller lever: High-precision

H2:

Roller lever: Overtravel, general-purpose

G2:

Roller lever: Overtravel, high-sensitivity

D2:

Plunger: Top-roller plunger

D28: Plunger: Top-roller plunger, sealed

3. Built-inSwitchType

Blank: Standard

55:

Hermetically sealed

4. Wiring Specifications

K13A:

Direct-wired Connector

(2-core: AC, NO wiring, connector pins No. 3, 4)

K13:

Direct-wired Connector

(2-core: DC, NO wiring, connector pins No. 3, 4)

K43A:

Direct-wired Connector (4-core: AC)

K43:

Direct-wired Connector (4-core: DC)

-M1J:

Pre-wired Connector*

(2-core: DC, NO wiring, connector pins No. 3, 4)

-M1GJ:

Pre-wired Connector*

(2-core: DC, NO wiring, connector pins No. 1, 4)

-M1JB:

Pre-wired Connector*

(2-core: DC, NC wiring, connector pins No. 3, 2)

-AGJ03:

Pre-wired Connector* (4-core, AC)

-DGJ03:

Pre-wired Connector* (4-core, DC)

-DK1EJ03: Pre-wired Connector*

(3-core: DC, NO wiring, connector pins No. 2, 3, 4)

Note: *With 0.3-m cable attached.