!Caution

1. Under Operation of Equipment

1-1. Do not touch a capacitor directly with bare hands

during operation in order to avoid the danger of a

electric shock.

1-2. Do not allow the terminals of a capacitor to come in

contact with any conductive objects (short-circuit).

Do not expose a capacitor to a conductive liquid,

inducing any acid or alkali solutions.

1-3. Confirm the environment in which the equipment will

operation is under the specified conditions.

Do not use the equipment under the following

environment.

(1) Being spattered with water or oil.

(2) Being exposed to direct sunlight.

(3) Being exposed to Ozone, ultraviolet rays or

radiation.

(4) Being exposed to toxic gas (e.g., hydrogen sulfide,

sulfur dioxide, chlorine, ammonia gas, etc.)

(5) Any vibrations or mechanical shocks exceeding

the specified limits.

(6) Moisture condensing environments.

1-4. Use damp proof countermeasures if using under any

conditions that can cause condensation.

2. Others

2-1. In an Emergency

(1) If the equipment should generate smoke, fire or

smell, immediately turn off or unplug the

equipment.

If the equipment is not turned off or unplugged,

the hazards may be worsened by supplying

continuous power.

(2) In this type of situation, do not allow face and

hands to come in contact with the capacitor or

burns may be caused by the capacitors high

temperature.

2-2. Disposal of Waste

When capacitors are disposed, they must be burned

or buried by the industrial waste vender with the

appropriate licenses.

2-3. Circuit Design

GRM, GCM, GMA/D, LLL/A/M, ERB, GQM, GJM,

GNM Series capacitors in this catalog are not safety

certified products.

2-4. Remarks

Failure to follow the cautions may result, worst case,

in a short circuit and smoking when the product is

used.

The above notices are for standard applications and

conditions. Contact us when the products are used in

special mounting conditions.

Select optimum conditions for operation as they

determine the reliability of the product after assembly.

The data herein are given in typical values, not

guaranteed ratings.

s Others

!Caution (Others)

33

1

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

C03E.pdf

10.5.20