8

ICS9250-13

PCI_STOP# Timing Diagram

PCI_STOP# is an asynchronous input to the ICS9250-13. It is used to turn off the PCICLK (0:5) clocks for low power operation.

PCI_STOP# is synchronized by the ICS9250-13 internally.The minimum that the PCICLK (0:5) clocks are enabled (PCI_STOP#

high pulse) is at least 10 PCICLK (0:5) clocks. PCICLK (0:5) clocks are stopped in a low state and started with a full high pulse

width guaranteed. PCICLK (0:5) clock on latency cycles are only one rising PCICLK clock off latency is one PCICLK clock.

Notes:

1. All timing is referenced to the Internal CPUCLK (defined as inside the ICS9248 device.)

2. PCI_STOP# is an asynchronous input, and metastable conditions may exist. This signal is required to be synchronized

inside the ICS9248.

3. All other clocks continue to run undisturbed.

4. CPU_STOP# is shown in a high (true) state.