UM1811 datasheet(17/52 Pages) STMICROELECTRONICS

No. de pieza	UM1811

Descripción Electrónicos	G3-PLC graphical user interface

PDF	52 Pages

Scroll/Zoom	100%

Fabricante Electrónico	STMICROELECTRONICS [STMicroelectronics]

Página de inicio	http://www.st.com

Logo

17 / 52 page

DocID026814 Rev 1

17/52

UM1811

PHY menu

To be able to execute PHY layer commands, the G3-PLC platform working mode needs to

be configured to the PHY mode.

To do this, simply go to the G3LIB panel as shown in Figure 9. Choose the PHY_MODE

from the available modes (1) and press the HI-MODE-SET.Request button (2).

Figure 9. Configure the host interface in PHY mode

Once the PHY mode is selected, the following menu panels may be accessed:



PHY root menu: it allows to send data in the physical layer mode



PDACK: physical data service for acknowledgment message sending



PLME control: physical layer management entity control panel, used for the line status

request and RX/TX configuration



PLME: physical layer management entity panel, used to set the transmission

parameter details (modulation, ToneMap, ToneMask, etc.).

UM1811 Datasheet(PDF) 17 Page - STMicroelectronics