UM1811 datasheet(31/52 Pages) STMICROELECTRONICS

31 / 52 page

DocID026814 Rev 1

31/52

UM1811

ADP menu

7.1

ADP root menu

The root menu offers the possibility to enter a payload and send it at the ADP layer, as

shown in Figure 19.

Figure 19. ADP root panel

The ADP root panel is composed of one single command:



ADPD-DATA.Request: requests IPv6 DATA transmission

Confirm and indication messages are automatically generated as explained in Section 3.4

on page 12.

The following options are available in the panel:



Payload type: selects the hexadecimal or ASCII input mode for the NSDU



Payload content: free text window to enter the NSDU to be sent (note that the data has

to be a valid IPv6 packet)



Max Payload Size: check box to configure the maximum size for the random option



Generate Random: option to generate a random NSDU



NsduHandle: the handle associated with the NSDU to be transmitted



QoS : quality of the service for the NSDU (normal priority, high priority, contention free)



Discover Route option: if TRUE, a route discovery procedure will be performed prior

sending the ADP frame, as long as a route to the destination is not available in the

routing table. If FALSE, no route discovery is performed.

UM1811 Datasheet(PDF) 31 Page - STMicroelectronics