| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
RM0312 Datasheet(PDF) 167 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
RM0312 Datasheet(HTML) 167 Page - STMicroelectronics |
|
167 / 275 page ![]() DocID022352 Rev 3 167/275 RM0312 8-bit basic timer (TIM4) 170 18.5.3 Slave mode control register (TIM4_SMCR) Address offset: 0x02 Reset value: 0x00 7 654 3210 MSM TS[2:0] Reserved SMS[2:0] rw rw rw Bit 7 MSM: Master/Slave mode 0: No action 1: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between timers (through TRGO). Bits 6:4 TS[2:0]: Trigger selection This bit-field selects the trigger input to be used to synchronize the counter. 000: Reserved 001: Reserved 010: Internal trigger ITR2 connected to TIM3 TRGO 011: Internal trigger ITR3 connected to TIM2 TRGO 100: Reserved 101: Reserved 110: Reserved 111: Reserved Note: These bits must be changed only when they are not used (e.g. when SMS=000) to avoid wrong edge detections at the transition. Bit 3 Reserved Bits 2:0 SMS[2:0]: Clock/trigger/slave mode selection When external signals are selected, the active edge of the trigger signal (TRGI) is linked to the polarity selected on the external input (see Input Control register and Control Register description). 000: Clock/trigger controller disabled - if CEN = ‘1’ then the prescaler is clocked directly by the internal clock. 001: Reserved 010: Reserved 011: Reserved 100: Trigger reset mode - Rising edge of the selected trigger signal (TRGI) reinitializes the counter and generates an update of the registers. 101: Gated Mode - The counter clock is enabled when the trigger signal (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled. 110: Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled. 111: External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter. |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |