MCS3142-ISLASHST datasheet(28/37 Pages) MICROCHIP

28 / 37 page

MCS3142

DS40001747A-page 28

 2014 Microchip Technology Inc.

FIGURE 8-2:

SYNCHRONIZATION WINDOW

8.3

Security Considerations

The strength of this security is based on keeping a

secret inside the transmitter that can be verified by

encrypted transmissions to a trained receiver. The

transmitter’s secret is the manufacturer’s key, not the

encryption algorithm. If that key is compromised, then

a smart transceiver can capture any serial number,

create a valid code word and trick all receivers trained

with that serial number. The key cannot be read from

the EEPROM without costly die probing, but it can be

calculated by brute force decryption attacks on

transmitted code words. The cost for these attacks

should exceed what the manufacturer would want to

protect.

To protect the security of other receivers with the same

manufacturer’s code, the manufacturer should use the

random seed for secure learn. It is a second secret that

is unique for each transmitter. Its transmission on a

special button press combination can be disabled if the

receiver has another way to find it, or limited to the first

127 transmissions for the receiver to learn it. This way,

it is very unlikely to ever be captured. If a

manufacturer’s key is compromised, clone transmitters

can be created, but without the unique seed, they have

to be relearned by the receiver. In the same way, if the

transmissions are decrypted by brute force on a

computer, the random seed hides the manufacturer’s

key and prevents more than one transmitter from being

compromised.

The length of the code word at these baud rates make

brute force attacks that guess the hopping code take

years. To make the receiver less susceptible to this

attack, it should test all bits in the decrypted code for

the correct value, not just the low counter bits and

function code.

The main benefit of hopping codes is to prevent the

retransmission of captured code words. This works

very well for code words which the receiver decodes.

Its weakness is that, if a code is captured when the

receiver misses it, the code may trick the receiver once

if it is used before the next valid transmission. The

receiver should increment the counter on questionable

code word receptions. The transmitter should use

separate buttons for lock and unlock functions. A

different method would be to require two different

buttons in sequence to gain access.

There are more ways to make KEELOQ systems more

secure, but they all have trade-offs. The user should

find a balance between security, design effort and

usability, particularly in failure modes. For example, if a

button sticks or kids play with it, the counter should not

advance into the Blocked Code window, rendering the

transmitter useless or requiring retraining.

MCS3142-I/ST Datasheet(PDF) 28 Page - Microchip Technology

MCS3142-I/ST Datasheet(HTML) 28 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Datasheet Descarga

Enlace URL