MPFC-115-270-QP

Power Factor Correction

Quarter-brick

MPFC-115-2

70-QP-N-M

MILITARY PO

WER FACTOR

CORRECTION

85-180Vrms

270 Vdc 350W

47 - 63Hz /

360 - 800Hz

Product MPFC-115-270-QP

Phone 1-888-567-9596

www.synqor.com

Doc.# 005-0006727 Rev. B

03/31/2016

Page 1

85-180Vrms

47 - 63Hz / 360 - 800Hz

270Vdc

350W

≥0.99

Up to 95%

Input Voltage

Input Frequency

Output Voltage

Output Power

Power Factor

Full Load Efficiency

Military Power Factor Correction Module

The MPFCQor Power Factor Correction module is an

essential building block of an AC-DC power supply.

Used in conjunction with a hold-up capacitor,

SynQor’s high efficiency DC-DC converters and

SynQor’s AC line filter, the MPFCQor will draw a

nearly perfect sinusoidal current (PF>0.99) from

a single phase AC input. The module is supplied

completely encased to provide protection from

the harsh environments seen in many military and

aerospace environments.

• Input voltage range: 85-180Vrms

• Universal input frequency range: 47 - 63Hz / 360 - 800Hz

• 350W output power

• ≥0.99 Power Factor

• High efficiency: >95% (115Vrms)

• Internal inrush current limit

• Auxiliary 10V bias supply

• Compatible with SynQor’s MCOTS DC-DC converters

and SynQor’s MCOTS AC line filters

Operational Features

• PFC Enable

• Load Enable (also: Power Out Good signal)

Control Features

• Input current limit and auto-recovery short circuit protection

• Auto-recovery input under/over-voltage protection

• Auto-recovery output over-voltage protection

• Auto-recovery thermal shutdown

Protection Features

Designed to meet these standards when used with

SynQor MACF Filters & MCOTS DC-DC Converters.

• MIL-STD-461(A-F)

• MIL-STD-1399

Compliance Features

• Input/Output to baseplate isolation 2150Vdc

• UL 60950-1/R:2011-12

• CAN/CSA-C22.2 No. 60950-1/A1:2011

• EN60950-1/A2:2013

• CE Marked

Safety Features

Mechanical Features

• Industry standard quarter-brick pin-out

• Size: 1.54” x 2.39” x 0.50” (39.0 x 60.6 x 12.7 mm)

• Total weight: 3.07 oz. (87 g)

• Flanged baseplate version available

Contents

Page No.

Typical Application ...........................................................................2

Technical Specification......................................................................3

Technical Diagrams ..........................................................................5

Screening & Qualification Testing ......................................................7

Application Section...........................................................................8

Encased Mechanical .......................................................................14

Encased Mechanical with Flange .....................................................15

Ordering Information .....................................................................16