| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
M95M02-DR Datasheet(PDF) 30 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
M95M02-DR Datasheet(HTML) 30 Page - STMicroelectronics |
|
30 / 45 page ![]() Power-up and delivery state M95M02-DR 30/45 DocID18203 Rev 10 7 Power-up and delivery state 7.1 Power-up state After power-up, the device is in the following state: • Standby power mode, • deselected (after power-up, a falling edge is required on Chip Select (S) before any instructions can be started), • not in the Hold condition, • the Write Enable Latch (WEL) is reset to 0, • Write In Progress (WIP) is reset to 0. The SRWD, BP1 and BP0 bits of the Status Register are unchanged from the previous power-down (they are non-volatile bits). 7.2 Initial delivery state The device is delivered with the memory array bits and identification page bits set to all 1s (each byte = FFh). The Status Register Write Disable (SRWD) and Block Protect (BP1 and BP0) bits are initialized to 0. |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |