PM8903A datasheet(22/33 Pages) STMICROELECTRONICS

No. de pieza	PM8903A

Descripción Electrónicos	3 A step-down monolithic switching regulator

PDF	33 Pages

Scroll/Zoom	100%

Fabricante Electrónico	STMICROELECTRONICS [STMicroelectronics]

Página de inicio	http://www.st.com

Logo

22 / 33 page

Application information

PM8903A

22/33

Doc ID 024147 Rev 1

Electrolytic capacitors have a large capacitance to minimize voltage deviation during load

transients while they do not show the same ESR values as the MLCC, resulting then in

higher ripple voltages.

A mix between an electrolytic and MLCC capacitor can be used to minimize ripple as well as

reducing voltage deviation in dynamic mode.

The high bandwidth error amplifier of the PM8903A and external compensation enables a

wide range of output filter configurations (including all MLCC solutions) and fast transient

response.

6.5

Input capacitors

The input capacitor bank is designed considering, mainly, the input RMS current that

depends on the output deliverable current (IOUT) and the duty-cycle (D) for the regulation as

follows:

The equation reaches its maximum value, IOUT/2, with D = 0.5. The losses depend on the

input capacitor ESR and, in the worst case, are:

rms

OUT

–

()

⋅

PESR

OUT 2

⁄

()

⋅

PM8903A Datasheet(PDF) 22 Page - STMicroelectronics