PM8903A datasheet(29/33 Pages) STMICROELECTRONICS

No. de pieza	PM8903A

Descripción Electrónicos	3 A step-down monolithic switching regulator

PDF	33 Pages

Scroll/Zoom	100%

Fabricante Electrónico	STMICROELECTRONICS [STMicroelectronics]

Página de inicio	http://www.st.com

Logo

29 / 33 page

PM8903A

PM8903A demonstration board

Doc ID 024147 Rev 1

29/33

7.1.4

Test points and jumper connection

Use the following test points in order to measure the most important signals of the

PM8903A.

●

VCC1 / VCC2: monitor the supply voltages

●

VIN1 / VIN2: monitor the input voltages

●

V_OUT_S1 / V_OUT_S2: monitor the output voltages (use these test points to perform

efficiency load-line regulation measurements)

●

PGOOD1 / PGOOD2: (active high) monitor the regular functioning of the controllers

●

SYNCH1 / SYNCH2: these are usually shorted when two devices are synchronized

together.

Unplug jumpers JP1 /JP2 in order to remove the power input voltage from device U1, device

U2, or both. Provide power supply voltage to one device at a time when performing

efficiency tests.

Turn on Dip-Switch SW1 in order to disable device U1, device U2, or both.

PM8903A Datasheet(PDF) 29 Page - STMicroelectronics