ST10F296 datasheet(51/346 Pages) STMICROELECTRONICS

51 / 346 page

Obsolete

Product(s)

- Obsolete

Product(s)

ST10F296E

Internal Flash memory

51/346

Flash control register 1 high (FCR1H)

The Flash control register 1 high (FCR1H) and the Flash control register 1 low (FCR1L) are

used to select the sectors to erase, or they are used, during any write operation, to monitor

the status of each sector and each bank of the module selected by the SMOD bit of the

FCR0H register. FCR1H is shown below when SMOD = 0 and when SMOD = 1.

FCR1H (0x0E 0006) SMOD = 0

FCR

Reset value: 0000h

5432

Reserved

B3S

B2S

Reserved

B3F1 B3F0

-RS

Table 15.

FCR1H register description (SMOD = 0, XFlash selected)

BIt

Bit name

Function

15-10

Reserved

9-8

B[3:2]S

Bank 3-2 status (XFlash)

During any erase operation, these bits are automatically modified and

give the status of the two banks, B3-B2. The meaning of the BxS bit for

Bank x is given in Table 17. Bits B[3:2]S are automatically reset at the

end of a erase operation if no errors are detected.

7-2

Reserved

1-0

B3F[1:0]

Bank 3 XFlash sector 1:0 status

During any erase operation, these bits are automatically set and give

the status of the two sectors of Bank 3 (B3F1-B3F0). The meaning of

B3Fy bit for sector y of Bank 1 is given in Table 17. Bits B3F[1:0] are

automatically reset at the end of a erase operation if no errors are

detected.

Obsolete

Product(s)

- Obsolete

Product(s)

ST10F296 Datasheet(PDF) 51 Page - STMicroelectronics

ST10F296 Datasheet(HTML) 51 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL