Pilkor components

PFC Input Capacitors

PCMP 352

Metallized Polypropylene film capacitors

(MPP)

269

MOUNTING

NORMAL USE

The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers

are designed for mounting on printed-circuit boards by means of automatic insertion machines.

SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATIONAND SHOCK

. For pitches of 15 mm the capacitors shall be mechanically fixed by the leads

. For larger pitches the capacitors shall be mounted in the same way and the body clamped.

SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD

The maximum length and width of film capacitors are shown in the following drawing ;

- Eccentricity as in drawing.

The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.

STORAGE TEMPERATURE

RATINGS AND CHARACTERISTICS

Unless otherwise specified all electrical values apply at an ambient temperature of 23 ±1℃, an

atmospheric pressure of 86 to 106kPa and a relative humidity of 50 ±2%.

For reference testing a conditioning period shall be applied of 96 ±4 hours by heating the products in a

circulating air oven at the rated temperature and a relative humidity not exceeding 20%.

Eccentricity

Imax = I +0.3 mm

b max = b + 0.3mm