PCMP352 datasheet(6/9 Pages) WPI

6 / 9 page

Pilkor components

PFC Input Capacitors

PCMP 352

Metallized Polypropylene film capacitors

(MPP)

270

CHARACTERISTICS

●

Test Voltage

- Cut off current 10mA / rise time 100V/sec.

- Test Voltage ( between lead and lead ) : 1.6 x VRdc, 1min.

- Test Voltage ( between leads and case ) : 2840 Vdc, 1min.

●

Capacitance

. Capacitance : Within specified tolerance range when sine wave AC is applied

at 1kHz ±200Hz and 5Vrms

●

Dissipation Factor(DF)

. Dissipation factor: When sine wave AC is applied at 10kHz and ≤1 Vrms, DF<20X10

-4

●

Insulation Resistance

. The insulation resistance is measured for 1min.±5s, at 100V for VRdc<500V, at 500V for VRdc≥500V

( R = insulation resistance between the terminations[Ω], C= capacitance[Farad] )

●

Rated Voltage Pulse Load Slope(dV/dt)R

. For values see specific reference data. IF the pulse voltage is lower than the rated voltage,

values of the specific reference data must be multiplied by VRdc and divided by the applied voltage.

MAXIMUM RATED VOLTAGE PULSE SLOPE (V/㎲)

Rated voltage

P = 10.0 mm

P = 15.0 mm

450V

47.5

Minimum RC

Minimum Insulation Resistance

Rated voltage

Capacitance > 0.33uF

Capacitance ≤ 0.33uF

450V

> 10,000s

> 30GΩ

PCMP352 Datasheet(PDF) 6 Page - World Produts Inc.

PCMP352 Datasheet(HTML) 6 Page - World Produts Inc.

Html Pages

1 2 3 4 5 6 7 8 9

Datasheet Descarga

Enlace URL