| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
MIC2133 Datasheet(PDF) 1 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MIC2133 Datasheet(HTML) 1 Page - Microchip Technology |
|
1 / 50 page ![]() 2022 Microchip Technology Inc. and its subsidiaries DS20006653B-page 1 MIC2133 Features • Input Voltage Range: 8V to 75V • Input Down to 2V when VDD = 5V from External Supply • Adjustable Output Voltage from 0.6V to 28V • Adaptive Constant On-Time Control: - High Delta V operation - Any Capacitor™ stable • 0.6V Internal Reference with ±1% Accuracy • Ripple Injection from Third Node Allows Greater than 50% Duty Cycles • HyperLight Load® and Automatic Phase Shedding • Ability to Interface with External MCU • Accurate Current Balancing Between Phases • Accurate 180° Phasing of Outputs • 100 kHz to 1 MHz Switching Frequency per Phase • High-Voltage Internal 5V LDO for Single-Supply Operation • Secondary LDO to Improve System Efficiency • Supports Start-up to Pre-Bias Output • Remote Sense Amplifier for Tight Output Regulation • Droop Feature to Support Adaptive Voltage Positioning (AVP) for Improved Load Transient Response • Precision Enable Function for Low Standby Current • External Programmable Soft Start to Reduce Inrush Current • Lossless RDSON Current Sensing with NTC Temperature Compensation or Resistor Sensing Method • Programmable Current Limit and Hiccup Mode Short-Circuit Protection • Thermal Shutdown with Hysteresis • -40°C to +125°C Junction Temperature Range • Compact Size 5 mm x 5 mm, 32-Pin VQFN Package • AEC-Q100 Qualified (VAO Suffix) Applications • Distributed Power Systems • Communications/Networking Infrastructure • Printers, Scanners, Graphic and Video Cards • FPGA, CPU, Memory, GPU Core Supplies • Automotive POL General Description The MIC2133 is a constant on-time, dual phase, synchronous buck controller featuring a unique adaptive on-time control architecture with HyperLight Load and phase shedding features enabled. The MIC2133 oper- ates over an input supply range from 8V to 75V. The out- put voltage is adjustable down to 0.6V with an ensured accuracy of ±1% at the FBS pin. The device operates with programmable switching frequency from 100 kHz to 1 MHz per phase. The Hyper Speed Control architecture supports an ultra- fast transient response under medium to heavy loads. The soft start is also programmable externally with a capacitor, thus, enabling safe start-ups into heavy loads. The MIC2133 has a remote sense amplifier for accurate output voltage control. MIC2133 offers a full suite of protection features to ensure protection of the IC during Fault conditions. These include undervoltage lockout to ensure proper operation, programmable soft start to reduce inrush cur- rent, overvoltage discharge, Hiccup mode short-circuit protection and thermal shutdown. MIC2133 is available in a 5 mm x 5 mm, 32-pin VQFN package with a -40°C to +125°C operating junction temperature range. Package Type *Includes Exposed Thermal Pad (EP); see Table 3-1. MIC2133 32-Pin 5 mm x 5 mm VQFN* (ML) AGND 75V Dual Phase, Advanced COT Buck Controller with Selectable Droop Feature and Phase Shedding |
Número de pieza similar - MIC2133 |
|
Descripción similar - MIC2133 |
|
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |