ADC3683 datasheet(28/70 Pages) TI1

28 / 70 page

7.3.4.5 Decimation Filter

The ADC3683-SP supports complex decimation by 2, 4, 8, 16 and 32 with a stopband rejection of at least 85dB

and a pass-band bandwidth of approximately 80%. Table 7-3 gives an overview of the pass-band bandwidth

of the different decimation settings with respect to ADC sampling rate FS. In real decimation mode the output

bandwidth is half of the complex bandwidth.

Table 7-3. Decimation Filter Summary and Maximum Available Output Bandwidth

REAL/COMPLEX

DECIMATION

SETTING N

OUTPUT RATE

OUTPUT

BANDWIDTH

OUTPUT RATE

(FS = 65 MSPS)

OUTPUT BANDWIDTH

(FS = 65 MSPS)

Complex

FS / 2 complex

0.8 × FS / 2

32.5 MSPS complex

26 MHz

FS / 4 complex

0.8 × FS / 4

16.25 MSPS complex

13 MHz

FS / 8 complex

0.8 × FS / 8

8.125 MSPS complex

6.5 MHz

FS / 16 complex

0.8 × FS / 16

4.0625 MSPS complex

3.25 MHz

FS / 32 complex

0.8 × FS / 32

2.03125 MSPS complex

1.625 MHz

Real

FS / 2 real

0.4 × FS / 2

32.5 MSPS

13 MHz

FS / 4 real

0.4 × FS / 4

16.25 MSPS

6.5 MHz

FS / 8 real

0.4 × FS / 8

8.125 MSPS

3.25 MHz

FS / 16 real

0.4 × FS / 16

4.0625 MSPS

1.625 MHz

FS / 32 real

0.4 × FS / 32

2.03125 MSPS

0.8125 MHz

The decimation filter responses are normalized to the ADC sampling clock frequency FS and illustrated in Figure

7-23 to Figure 7-32. They are interpreted as follows:

Each figure contains the filter pass-band, transition band(s) and alias or stop-band(s) as shown in Figure 7-22.

The x-axis shows the offset frequency (after the NCO frequency shift) normalized to the ADC sampling rate FS.

For example, in the divide-by-4 complex setup, the output data rate is FS / 4 complex with a Nyquist zone of FS /

8 or 0.125 × FS. The transition band (colored in blue) is centered around 0.125 × FS and the alias transition band

is centered at 0.375 × FS. The stop-bands (colored in red), which alias on top of the pass-band, are centered at

0.25 × FS and 0.5 × FS. The stop-band attenuation is greater than 85dB.

-120

-100

-80

-60

-40

-20

0.1

0.2

0.3

0.4

0.5

Normalized Frequency (Fs)

Passband

Transition Band

Alias Band

Attn Spec

Filter

Transition

Bands

Bands that alias on top

of signal band

Pass Band

Figure 7-22. Interpretation of the Decimation Filter Plots

ADC3683-SP

SBASAB5 – MARCH 2024

www.ti.com

Submit Document Feedback

Product Folder Links: ADC3683-SP

ADC3683 Datasheet(PDF) 28 Page - Texas Instruments

ADC3683 Datasheet(HTML) 28 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70

Datasheet Descarga

Enlace URL