5 Specifications

5.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)

MIN

MAX

UNIT

Power-supply voltage

High-side AVDD to AGND

–0.3

6.5

V

Low-side DVDD to DGND

–0.3

6.5

Analog input voltage

INP, INN to AGND

AGND – 4

AVDD + 0.5

V

Digital input voltage

CLKIN to DGND

DGND – 0.5

DVDD+ 0.5

V

Digital output voltage

DOUT to DGND

DGND – 0.5

DVDD + 0.5

V

Transient isolation voltage(2)

AC voltage, t = 60s(3)

570

VRMS

DC voltage, t = 60s(3)

800

VDC

Input current

Continuous, any pin except power-supply pins

–10

10

mA

Temperature

Junction, TJ

150

°C

Storage, Tstg

–65

150

(1)

Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply

functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions.

If used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully

functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime.

(2)

Common-mode from left-side (pins1-4) to right-side (pins5-8) of the package.

(3)

Cumulative.

5.2 ESD Ratings

VALUE

UNIT

V(ESD)

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V

Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002(2)

±1000

(1)

JEDEC document JEP155 states that 500V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250V CDM allows safe manufacturing with a standard ESD control process.

AMC0106M05

SBASAS7A – AUGUST 2024 – REVISED JUNE 2025

www.ti.com

4

Submit Document Feedback

Copyright © 2025 Texas Instruments Incorporated

Product Folder Links: AMC0106M05