Motor de Búsqueda de Datasheet de Componentes Electrónicos
  Mexican  ▼
ALLDATASHEET.COM.MX

X  

ST60A3H1 Datasheet(PDF) 39 Page - STMicroelectronics

No. de pieza ST60A3H1
Descripción Electrónicos  60 GHz V-band contactless connectivity transceiver with linear-polarization integrated antenna, and tunneling eUSB2, UART, GPIO or I²C
PDF  72 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricante Electrónico  STMICROELECTRONICS [STMicroelectronics]
Página de inicio  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

ST60A3H1 Datasheet(HTML) 39 Page - STMicroelectronics

Back Button ST60A3H1 Datasheet HTML 35Page - STMicroelectronics ST60A3H1 Datasheet HTML 36Page - STMicroelectronics ST60A3H1 Datasheet HTML 37Page - STMicroelectronics ST60A3H1 Datasheet HTML 38Page - STMicroelectronics ST60A3H1 Datasheet HTML 39Page - STMicroelectronics ST60A3H1 Datasheet HTML 40Page - STMicroelectronics ST60A3H1 Datasheet HTML 41Page - STMicroelectronics ST60A3H1 Datasheet HTML 42Page - STMicroelectronics ST60A3H1 Datasheet HTML 43Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 39 / 72 page
background image
5.5
Power consumption
This section provides current consumption values for each state.
The typical values in the tables below are for supply voltages and ambient temperature, within the ranges
specified in the preceding tables (see Section 5.4: Normal operating conditions).
Note:
The lowest power state of the whole system is a Remote device in RF_DETECT state and a Local device in
RF_IDLE state.
5.5.1
RF_IDLE parameters
RF_IDLE power consumption is optimal only if the internal pull-up on RF_EN pin is disabled. This is not the
default setting (see Section 2.7.3: Entry into RF_IDLE state).
Table 12. Current consumption in RF_IDLE state (RF_EN low)
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
IRF_IDLE
Current in RF_IDLE state,
Local/Remote
RF_EN low, no I²C configuration
traffic
-
12.5
86
µA
5.5.2
RF_DETECT parameters
The power consumption in RF_DETECT state depends on the discovery scenario chosen, as described in
Section 2.8.3.1.1: Power consumption and detection time. Table 13 provides the consumption for a scenario
where optimization for the Passive detection device is chosen. Contact STMicroelectronics representative if
another discovery scenario is desired.
Table 13. Current consumption in RF_DETECT state
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
IDISCOVERY_LOCAL(1)
Current in RF_DETECT
state for a Local device
Local ST60A3H1 in Full
detection mode.
-
6200
8000
µA
IDISCOVERY_REMOTE
Current in RF_DETECT
state for a Remote
device
Remote ST60A3H1 waiting to
be paired in Passive detection
mode. Reported for passive
detector based on 500 ms
average search time.
-
14
88.5
µA
1. Informative only.
ST60A3H1
Electrical characteristics
DS14598 - Rev 2
page 39/72



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72


Datasheet Descarga

Go To PDF Page


Enlace URL



¿ALLDATASHEET es útil para Ud.?  [ DONATE ] 

Todo acerca de Alldatasheet   |   Publicidad   |   Contáctenos   |   Política de Privacidad   |   Enlace a la hoja de datos    |   Intercambio de Enlaces   |   Lista de Fabricantes
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com