MSC7116 datasheet(59/60 Pages) FREESCALE

59 / 60 page

Revision History

MSC7116 Data Sheet, Rev. 13

Freescale Semiconductor

Revision History

Table 36 provides a revision history for this data sheet.

Table 36. Document Revision History

Revision

Date

Description

Apr 2004

• Initial public release.

May 2004

• Added ordering information and new package options.

Aug. 2004

• Updated clock parameter values.

• Updated DDR timing specifications.

• Updated I2C timing specifications.

Sep. 2004

• Updated Figures 1-2 and 1-2 to correct HDSP and DBREQ.

• Corrected EE0 port reference.

• Updated ball location for HDSP.

Jan. 2005

• Added signal HA3.

• Updated absolute maximum ratings, DDR DRAM capacitance specifications, clock parameters, reset

timing, and TDM timing.

• Added note for timing reference for I2C interface.

• Expanded GPIO timing information.

• Corrected pin T20 and K20 signal designation.

• Corrected signal names to GPAO15 and IRQ2.

• Expanded design guidelines in Chapter 4.

Mar. 2005

• Updated features list.

• Updated power specifications.

• Changed CLKIN frequency range.

• Added clock configuration information.

• Updated JTAG timings.

Apr. 2005

• Added recommended power supply ratings and updated equations to estimate power consumption.

Oct. 2005

• Updated core and total power consumption examples.

Dec. 2005

• Added information about the new mask set 1M88B. Affected all sections.

Nov. 2006

• Updated arrows in Host DMA Writing Timing figure.

• Updated boot overview in Section 4.4.3.

Apr. 2007

• Removed erroneous references to VCCSYN and VCCSYN1.

Jul. 2007

• Updated to new data sheet format. Reorganized and renumbered sections, figures, and tables.

• Removed all references to obsolete mask set 1L44X and corresponding specification values.

• Added a note to clarify the definition of TCK timing 700 in new Table 31.

• Reworked reset and boot sections.

• Expanded I2C boot information and added SPI boot information.

• Removed obsolete part numbers.

Aug 2007

• The power-up and power-down sequences described in Section 3.2 starting on page 42 have been expanded

to five possible design scenarios/cases. These cases replace the previously recommended

power-up/power-down sequence recommendations. Section 3.2 has been clarified by adding subsection

headings.

Apr 2008

• Change the PLL filter resistor from 20

Ω to 2 Ω in Section 3.2.5.

MSC7116 Datasheet(PDF) 59 Page - Freescale Semiconductor, Inc

MSC7116 Datasheet(HTML) 59 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Datasheet Descarga

Enlace URL