GD5F1GQ4REFJS datasheet(5/60 Pages) GIGADEVICE

5 / 60 page

SPI(x1/x2/x4) NAND Flash

GENERAL DESCRIPTION

SPI (Serial Peripheral Interface) NAND Flash provides an ultra cost-effective while high density non-volatile memory

storage solution for embedded systems, based on an industry-standard NAND Flash memory core. It is an attractive

alternative to SPI-NOR and standard parallel NAND Flash, with advanced features:

• Total pin count is 8, including VCC and GND

• Density is 1G bit

• Superior write performance and cost per bit over SPI-NOR

• Significant low cost than parallel NAND

This low-pin-count NAND Flash memory follows the industry-standard serial peripheral interface, and always remains the

same pin-out from one density to another. The command sets resemble common SPI-NOR command sets, modified to

handle NAND specific functions and added new features. GigaDevice SPI NAND is an easy-to-integrate NAND Flash

memory, with specified designed features to ease host management:

• User-selectable internal ECC. ECC code is generated internally during a page program operation. When a page is

read to the cache register, the ECC code is detect and correct the errors when necessary. The 64-bytes spare area is

available even when internal ECC enabled. The device outputs corrected data and returns an ECC error status.

• Internal data move or copy back with internal ECC. The device can be easily refreshed and manage garbage

collection task, without need of shift in and out of data.

• Power on Read with internal ECC. The device will automatically read first page of fist block to cache after power

on, then host can directly read data from cache for easy boot. Also the data is promised correctly by internal ECC.

It is programmed and read in page-based operations, and erased in block-based operations. Data is transferred to or from

the NAND Flash memory array, page by page, to a data register and a cache register. The cache register is closest to I/O

control circuits and acts as a data buffer for the I/O data; the data register is closest to the memory array and acts as a data

buffer for the NAND Flash memory array operation. The cache register functions as the buffer memory to enable page and

random data READ/WRITE and copy back operations. These devices also use a SPI status register that reports the status

of device operation.

GD5F1GQ4REFJS Datasheet(PDF) 5 Page - GigaDevice Semiconductor (Beijing) Inc.