| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
STPMIC1APQR Datasheet(PDF) 2 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STPMIC1APQR Datasheet(HTML) 2 Page - STMicroelectronics |
|
2 / 140 page ![]() 1 Device configuration The STPMIC1 has a non-volatile memory (NVM) that enables scalability to support a wide range of applications: • Default output voltage, POWER_UP/POWER_DOWN sequence, protection behavior, auto turn-on functionality, I2C slave address • The STPMIC1A, STPMIC1B, STPMIC1D and STPMIC1E are pre-programmed devices to support the STM32MP1 series application processor versions • The STPMIC1C is not a programmed device to support custom applications • Straightforward NVM (re)programming via I2C to facilitate mass production directly in target applications Table 1. Default NVM configuration vs part number Default configuration table STPMIC1A STPMIC1B STPMIC1C STPMIC1D STPMIC1E Default output voltage Rank Default output voltage Rank Default output voltage Rank Default output voltage Rank Default output voltage Rank LDO1 1.8 V 0 1.8 V 0 1.8 V 0 1.8 V 0 1.8 V 0 LDO2 1.8 V 0 2.9 V 2 1.8 V 0 1.8 V 0 1.8 V 0 LDO3 1.8 V 0 1.8 V 0 1.8 V 0 1.8 V 0 1.8 V 0 LDO4 3.3 V 3 3.3 V 3 3.3 V 0 3.3 V 3 3.3 V 3 LDO5 2.9 V 2 2.9 V 2 1.8 V 0 3.3 V 2 2.9 V 2 LDO6 1.0 V 0 1.0 V 0 1.0 V 0 1.0 V 0 1.0 V 0 REFDDR 0.55 V 0 0.55 V 0 0.55 V 0 0.55 V 0 0.55 V 0 BOOST 5.2 V N/A 5.2 V N/A 5.2 V N/A 5.2 V N/A 5.2 V N/A BUCK1 1.2 V 2 1.2 V 2 1.1 V 0 1.2 V 3 1.2 V 3 BUCK2 1.1 V 0 1.1 V 0 1.1 V 0 1.1 V 0 1.1 V 0 BUCK3 3.3 V 1 1.8 V 1 1.2 V 0 3.3 V 1 1.8 V 1 BUCK4 3.3 V 2 3.3 V 2 1.15 V 0 1.2 V 2 1.2 V 2 Default value VINOK_Rise 3.5 V 3.3 V 3.5 V 4.0 V 3.3 V The start-up sequence is split into four steps (Rank0 to Rank3). Each BUCK converter or LDO regulator can be programmed to be automatically turned ON in one of these phases: • Rank= 0: rail not turned ON automatically, no output voltage appears after POWER-UP • Rank= 1: rail automatically turned ON after 7 ms following a Turn_ON condition • Rank= 2: rail automatically turned ON after further 3 ms • Rank= 3: rail automatically turned ON after further 3 ms Whatever the STPMIC1 version: • AUTO_TURN_ON option is set • Boost and switches cannot be turned ON automatically STPMIC1 Device configuration DS12792 - Rev 7 page 2/140 |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |