| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
M48T212AMH Datasheet(PDF) 8 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
M48T212AMH Datasheet(HTML) 8 Page - STMicroelectronics |
|
8 / 20 page ![]() M48T212A 8/20 Table 11. Write Mode AC Characteristics (TA = 0 to 70°C) Note: 1. CL = 5pF. 2. If E goes low simultaneously with W going low, the outputs remain in the high impedance state. Symbol Parameter M48T212A Unit -85 Min Max tAVAV Write Cycle Time 85 ns tAVWL Address Valid to Write Enable Low 0 ns tAVEL Address Valid to Chip Enable Low 0 ns tWLWH Write Enable Pulse Width 55 ns tELEH Chip Enable Low to Chip Enable High 60 ns tWHAX Write Enable High to Address Transition 0 ns tEHAX Chip Enable High to Address Transition 0 ns tDVWH Input Valid to Write Enable High 30 ns tDVEH Input Valid to Chip Enable High 30 ns tWHDX Write Enable High to Input Transition 0 ns tEHDX Chip Enable High to Input Transition 0 ns tWLQZ (1,2) Write Enable Low to Output High-Z 25 ns tAVWH Address Valid to Write Enable High 65 ns tAVEH Address Valid to Chip Enable High 65 ns tWHQX (1,2) Write Enable High to Output Transition 5 ns Address Decoding The M48T212A accommodates 4 address lines (A3-A0) which allow access to the sixteen bytes of the TIMEKEEPER clock registers. All TIMEKEEP- ER registers reside in the controller chip itself. All TIMEKEEPER registers are accessed by enabling E (Chip Enable). READ MODE The M48T212A executes a read cycle whenever W (Write Enable) is high and E (Chip Enable) is low. The unique address specified by the address inputs (A3-A0) defines which one of the on-chip TIMEKEEPER registers is to be accessed. When the address presented to the M48T212A is in the range of 0h-Fh, one of the on-board TIMEKEEP- ER registers is accessed and valid data will be available to the eight data output drivers within tAVQV after the address input signal is stable, pro- viding that the E and G access times are also sat- isfied. If they are not, then data access must be measured from the latter occurring signal (E or G) and the limiting parameter is either tELQV for E or tGLQV for G rather than the address access time. When EX input is low, an external SRAM location will be selected. Note: Care should be taken to avoid taking both E and EX low simultaneously to avoid bus conten- tion. |
|
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |