MPC8377ECVRALDA datasheet(15/124 Pages) FREESCALE

15 / 124 page

MPC8377E PowerQUICC™ II Pro Processor Hardware Specifications, Rev. 2

Freescale Semiconductor

RESET Initialization

5.2

RESET AC Electrical Characteristics

Table 10 provides the reset initialization AC timing specifications of the device.

Table 11 provides the PLL lock times.

Table 10. RESET Initialization Timing Specifications

Parameter/Condition

Min

Max

Unit

Notes

Required assertion time of HRESET to activate reset flow

—

tPCI_SYNC_IN

Required assertion time of PORESET with stable clock applied to CLKIN when

the device is in PCI host mode

—

tCLKIN

Required assertion time of PORESET with stable clock applied to PCI_CLK when

the device is in PCI agent mode

—

tPCI_SYNC_IN

HRESET assertion (output)

512

—

tPCI_SYNC_IN

HRESET negation to negation (output)

—

tPCI_SYNC_IN

Input setup time for POR config signals (CFG_RESET_SOURCE[0:3],

CFG_CLKIN_DIV, and CFG_LBMUX) with respect to negation of PORESET

when the device is in PCI host mode

4—

tCLKIN

Input setup time for POR config signals (CFG_RESET_SOURCE[0:3],

CFG_CLKIN_DIV, and CFG_LBMUX) with respect to negation of PORESET

when the device is in PCI agent mode

4—

tPCI_SYNC_IN

Input hold time for POR config signals with respect to negation of HRESET

0—

—

Time for the device to turn off POR config signals with respect to the assertion of

HRESET

—4

Time for the device to start driving functional output signals multiplexed with the

POR configuration signals with respect to the negation of HRESET

1—

tPCI_SYNC_IN

1, 3

Note:

1 t

PCI_SYNC_IN is the clock period of the input clock applied to PCI_SYNC_IN. When the device is In PCI host mode the primary

clock is applied to the CLKIN input, and PCI_SYNC_IN period depends on the value of CFG_CLKIN_DIV. See the

MPC8379E

Integrated Host Processor Reference Manual for more details.

2 t

CLKIN is the clock period of the input clock applied to CLKIN. It is only valid when the device is in PCI host mode. See the

MPC8379E Integrated Host Processor Reference Manual for more details.

3 POR config signals consists of CFG_RESET_SOURCE[0:3], CFG_LBMUX, and CFG_CLKIN_DIV.

Table 11. PLL Lock Times

Parameter

Min

Max

Unit

Notes

PLL lock times

—

100

μs—

Note:

• The device guarantees the PLL lock if the clock settings are within spec range. The core clock also depends on the core PLL

ratio. See Section 23, “Clocking,” for more information.

MPC8377ECVRALDA Datasheet(PDF) 15 Page - Freescale Semiconductor, Inc

MPC8377ECVRALDA Datasheet(HTML) 15 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL