| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
STLC5460 Datasheet(PDF) 26 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STLC5460 Datasheet(HTML) 26 Page - STMicroelectronics |
|
26 / 54 page ![]() Second Case CM = 0 (Bit of Command Register). The auxiliary Memory is selected. PCM DT6 DT5 DT4 DT3 DT2 DT1 DT0 - MON TX - M0 G2G1G0 PCM Bit is not significant. The other bits are relevant only if multiplex is GCI (See bits of Multiplex Con- figuration Register : GCI M0 and/or GCI M1). MON Command/Indicate MON = 0. The channel is Command/Indicate MON = 1. The channel is MON channel. TX Transmitter TX = 1. The transmit channel is selected. TX = 0. The receive channel is selected. M0 Multiplex 0. M0 = 0. The GCI multiplex 0 is selected. M0 = 1. The GCI multiplex 1 is selected. G2/G0 GCI 0/2 One of eight GCI channels of the multiplex selected (one GCI channel is constituted by five sub-channels : B1, B2, D, C/I and MON). If Multiplex is not GCI, the GCI channels are not validated. The 32 Time Slots of the multiplex can be used for switching. STATUS REGISTER (STATUS) 7 0 BID BUSY PRSR MONR MONT CIR EXT INS After Reset 00 (H) Each bit of this register is read only, except BID (bit) which can be written and read by the microproces- sor. BID Bi-directional Switching. BID = 1. two connection paths are established with the same µp instruction. The µp writes successively into three register: Command Register, Source Register and the Destination register lastly, when the Destination register has been written a write command memory starts to set up the connection required by the µp. The same information is used to establish a symmetrical connection: Source register and Destination register are swapped, and so are the SS0/1 and DS0/1 bit of Command Register. BID = 0: one connection path is established. The µp writes successively into three register: Command register, Source register and Destination register lastly, when the Destination register has been written a write command memory start to set up the connection required by the µp. STLC5460 26/54 |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |