Z8FS021 datasheet(17/68 Pages) ZILOG

17 / 68 page

PS028806-0315

Signal Descriptions

ZMOTION® Intrusion Detection

Product Specification

Oscillators

XIN

External Crystal Input. This pin is the input pin to the crystal oscillator. A

crystal can be connected between it and the XOUT pin to form the

oscillator. In addition, this pin is used with external RC networks or external

clock drivers to provide the system clock.

XOUT

External Crystal Output. This pin is the output of the crystal oscillator. A

crystal can be connected between it and the XIN pin to form the oscillator.

Clock Input

CLKIN

Clock Input Signal. This pin can be used to input a TTL-level signal to be

used as the system clock.

LED Drivers

LED

Direct LED drive capability. All port C pins have the capability to drive an

LED without any other external components. These pins have

programmable drive strengths set by the GPIO block.

On-Chip Debugger

DBG

I/O

Debug. This signal is the control and data input and output to and from the

On-Chip Debugger.

The DBG pin is open-drain and requires a pull-up resistor to ensure proper

operation.

Reset

RESET

I/O

RESET. Generates a Reset when asserted (driven Low). Also serves as a

reset indicator; the Z8 Encore! XP forces this pin low when in reset. This pin

is open-drain and features an enabled internal pull-up resistor.

Power Supply

VDD

Digital Power Supply.

AVDD

Analog Power Supply.

VSS

Digital Ground.

AVSS

Analog Ground.

Table 2. Z8FS021 MCU Signal Descriptions (Continued)

Signal

Mnemonic

I/O

Description

Caution:

Z8FS021 Datasheet(PDF) 17 Page - Zilog, Inc.

Z8FS021 Datasheet(HTML) 17 Page - Zilog, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

Datasheet Descarga

Enlace URL