| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
DSP56303 Datasheet(PDF) 28 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
DSP56303 Datasheet(HTML) 28 Page - Freescale Semiconductor, Inc |
|
28 / 292 page ![]() DSP56303 User’s Manual, Rev. 2 2-4 Freescale Semiconductor Signals/Connections 2.3 Clock GNDA (4) Address Bus Ground An isolated ground for sections of the address bus I/O drivers. This connection must be tied externally to all other chip ground connections, except GNDP and GNDP1. The user must provide adequate external decoupling capacitors. GNDD (4) Data Bus Ground An isolated ground for sections of the data bus I/O drivers. This connection must be tied externally to all other chip ground connections, except GNDP and GNDP1. The user must provide adequate external decoupling capacitors. GNDC (2) Bus Control Ground An isolated ground for the bus control I/O drivers. This connection must be tied externally to all other chip ground connections, except GNDP and GNDP1. The user must provide adequate external decoupling capacitors. GNDH Host Ground An isolated ground for the HI08 I/O drivers. This connection must be tied externally to all other chip ground connections, except GNDP and GNDP1. The user must provide adequate external decoupling capacitors. GNDS (2) ESSI, SCI, and Timer Ground An isolated ground for the ESSI, SCI, and timer I/O drivers. This connection must be tied externally to all other chip ground connections, except GNDP and GNDP1. The user must provide adequate external decoupling capacitors. Note: The subsystem GND signals (GNDQ, GNDA, GNDD, GNDC, GNDH, and GNDS) are listed for the 144-pin TQFP package. For the 196-ball MAP-BGA package, all grounds except GNDP and GNDP1 are connected together inside the package and referenced as GND . Table 2-4. Clock Signals Signal Name Type State During Reset Signal Description EXTAL Input Input External Clock/Crystal Input Interfaces the internal crystal oscillator input to an external crystal or an external clock. XTAL Output Chip-driven Crystal Output Connects the internal crystal oscillator output to an external crystal. If an external clock is used, leave XTAL unconnected. Table 2-3. Grounds (Continued) Ground Name Description |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |