| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
WM8741GEDS/V Datasheet(PDF) 30 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8741GEDS/V Datasheet(HTML) 30 Page - Wolfson Microelectronics plc |
|
30 / 64 page ![]() WM8741 Production Data w PD, Rev 4.2, October 2009 30 MCLK/LRCLK RATIO CONTROL (NORMAL PCM MODE) The ratio of MCLK/LRCLK can be programmed directly or auto-detected. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R7 Mode Control 1 07h [4:2] SR[3:0] 000 MCLK to LRCLK sampling rate ratio control (Normal PCM Mode): 000 = auto detect sample rate 001 = 128fs 010 = 192fs 011 = 256fs 100 = 384fs 101 = 512fs 110 = 768fs 111 = reserved Table 21 MCLK/LRCLK Ratio Control (Normal PCM Mode) 8FS MODE 8FS Mode allows the use of custom digital filters by bypassing the WM8741 internal digital filters. When MODE8X is set, the PCM data input to the WM8741 is applied only to the digital volume control and then the analogue section of the DAC system, bypassing the digital filters. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R7 Format Control 07h 7 MODE8X 0 8FS mode select: 0 = Normal operation 1 = 8FS mode (digital filters bypassed) Table 22 8FS Mode Control MCLK/LRCLK RATIO CONTROL (8FS MODE) In 8FS mode the choice of clock ratios and sampling rates is limited – see Table 12 for details. Autodetect of MCLK/LRCLK ratio is not available in 8FS mode and must be set manually by the user for correct operation. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R7 Mode Control 1 07h [4:2] SR[2:0] 000 MCLK to LRCLK sampling rate ratio control (8FS Mode): 000 = reserved 001 = 512fs 010 = 768fs 011 to 111 = reserved Table 23 MCLK/LRCLK Ratio Control (8FS Mode) ATTENUATION CONTROL Each DAC channel can be attenuated digitally before being applied to the digital filter. Attenuation is set to 0dB by default but can be set between 0dB and -127.5dB in 0.125dB steps using the ten attenuation control bits LAT[4:0], LAT[9:5], RAT[4:0] and RAT[9:5]. All attenuation registers are double latched allowing new values to be pre-latched to both channels before being updated synchronously. Setting the UPDATE bit on any attenuation write will cause all pre-latched values to be immediately applied to the DAC channels. |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |