| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
WM8741GEDS/V Datasheet(PDF) 32 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8741GEDS/V Datasheet(HTML) 32 Page - Wolfson Microelectronics plc |
|
32 / 64 page ![]() WM8741 Production Data w PD, Rev 4.2, October 2009 32 VOLUME RAMP MODE There are two ways to change the volume in the WM8741, controlled by VOL_RAMP. When VOL_RAMP=0, the volume changes in a single step from the current volume setting to the new volume when an update is applied to the gain control registers. When VOL_RAMP=1, the volume is automatically ramped from the current volume setting to the new volume setting when an update is applied to the volume control registers. The speed at which this happens is dependant on the sample rate as shown in Table 27 below: SAMPLE RATE (kHz) RAMP RATE (ms/dB) 32 1.000 44.1 0.726 48 0.667 88.2 0.726 96 0.667 176.4 0.726 196 0.667 Table 27 Volume Ramp Rates REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R4 Volume Control 04h 0 VOL_ RAMP 0 Volume ramp mode control: 0 = Apply volume change in a single step. 1 = Ramp between current volume setting and new volume setting. Table 28 Volume Ramp Control ANTI-CLIPPING DIGITAL ATTENUATION MODE Audio material is regularly recorded up to 0dB level and heavily compressed. This may cause clipping and occasional distortion when the digital media is applied to a DAC. In order to prevent this in the WM8741, an anti-clipping mode is provided, which attenuates the digital signal by 2dB as it is processed through the digital filters. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R4 Volume Control 04h 1 ATT2DB 0 Anti-clipping mode control: 0 = Off, 0dB attenuation 1 = On, 2dB attenuation applied Table 29 Anti-Clipping Digital Attenuation Control DSD PLUS GAIN CONTROL The gain in the DSD Plus data path can be adjusted. The default setting provides a 1.4Vrms differential output level. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R8 Mode Control 2 08h 6 DSD_ GAIN 0 DSD Plus gain control: 0 = Low gain, 1.4Vrms differential output level 1 = High gain, 2.0Vrms differential output level Table 30 DSD Plus Gain Control |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |