 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
AD9396/PCB Datasheet(PDF) 26 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD9396/PCB Datasheet(HTML) 26 Page - Analog Devices |
|
|
26 / 48 page  AD9396 Rev. 0 | Page 26 of 48 Hex Address Read/Write or Read Only Bits Default Value Register Name Description 0x30 Read [6] *0****** DVI Content Encrypted This bit is high when HDCP decryption is in use (content is protected). The signal goes low when HDCP is not being used. Customers can use this bit to determine whether to allow copying of the content. The bit should be sampled at regular intervals because it can change on a frame by frame basis. [5] **0***** DVI HSYNC Polarity Returns DVI HSYNC polarity. [4] ***0**** DVI VSYNC Polarity Returns DVI VSYNC polarity. 0x31 Read/Write [7:4] 1001**** MV Pulse Max Sets the maximum pseudo sync pulse width for Macrovision detection. [3:0] ****0110 MV Pulse Min Sets the minimum pseudo sync pulse width for Macrovision detection. 0x32 Read/Write [7] 0******* MV Oversample En Tells the Macrovision detection engine whether oversampling is in use. [6] *0****** MV Pal En Tells the Macrovision detection engine to enter PAL mode. [5:0] **001101 MV Line Count Start Sets the start line for Macrovision detection. 0x33 Read/Write [7] 1******* MV Detect Mode 0 = standard definition. 1 = progressive scan mode. [6] *0****** MV Settings Override 0 = use hard coded settings for line counts and pulse widths. 1 = use I2C values for these settings. [5:0] **010101 MV Line Count End Sets the end line for Macrovision detection. 0x34 Read/Write [7:6] 10****** MV Pulse Limit Set Sets the number of pulses required in the last 3 lines (SD mode only). [5] **0***** Low Freq Mode Sets whether the Audio PLL is in low frequency mode. Low frequency mode should only be set for pixel clocks <80 MHz. [4] ***0**** Low Freq Override Allows the previous bit to be used to set low frequency mode rather than the internal auto-detect. [3] ****0*** Up Conversion Mode 0 = repeat Cr and Cb values. 1 = interpolate Cr and Cb values. [2] *****0** CrCb Filter Enable Enables the FIR filter for 4:2:2 CrCb output. [1] ******0* CSC_Enable Enables the color space converter (CSC). The default settings for the CSC provide HDTV-to-RGB conversion. Sets the fixed point position of the CSC coefficients, including the A4, B4, and C4 offsets. 0x35 Read/Write [6:5] *01* **** CSC_Mode 00 = ±1.0, −4096 to +4095. 01 = ±2.0, −8192 to +8190. 1× = ±4.0, −16384 to +16380. [4:0] ***01100 CSC_Coeff_A1 MSB MSB, Register 0x36. 0x36 Read/Write [7:0] 01010010 CSC_Coeff_A1 Color space converter (CSC) coefficient for equation: ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4 GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4 B B OUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4 0x37 Read/Write [4:0] ***01000 CSC_Coeff_A2 MSB MSB, Register 0x38. 0x38 Read/Write [7:0] 00000000 CSC_Coeff_A2 LSB CSC coefficient for equation: ROUT = (A1 × RIN + (A2 × GIN) + (A3 × BIN) + A4 GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4 B B OUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4 |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Mexican ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
