| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
AS1163 Datasheet(PDF) 41 Page - ams-OSRAM AG |
|
|
|||||||||||||||||||||||||||||
AS1163 Datasheet(HTML) 41 Page - ams-OSRAM AG |
|
41 / 91 page ![]() AS1163 Functional description Datasheet • PUBLIC • Document Feedback DS001075 • v2-00 • 2025-Nov-21 41 / 91 / Figure 20: Output clustering 6.6.3 Haptic driver AS1163 can be used to drive a haptic actuator, by programming the OTP bit “haptic_driver” to 1. In this mode all drivers are clustered and the PWM frequency is reduced. The PWM setting is taken over by the channel 0 RED setting (this is equivalent to CH_clustering = 3). When the haptic actuator driving mode is selected, the PWM frequency is reduced with respect to the normal PWM frequency. So, it will be 146 Hz (nominally 150 Hz) when PWM speed is set to “low” or 293 Hz (nominally 300 Hz mode), when PWM speed is set to “fast”. |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |