AS1163 datasheet(78/91 Pages) AMSOSRAM

78 / 91 page

AS1163

Command and register description

Datasheet • PUBLIC • Document Feedback

DS001075 • v2-00 • 2025-Nov-21

78 / 91

7.13.12

READCURCHN (0x50)

There is a READCURCHN command for reading each individual LED driver DC current level.

Payload is 8-bit to select LED channel to read (0, 1, or 2).

Broadcast is not allowed.

Answer: 12-bit current configuration for the selected channel.

Table 34: Format of READCURCHN register

Addr: 0x50

READCURCHN

Bit

Bit name

Default

Access

Bit description

reserved

0x0

Must be set to 0

SYNC_EN

0x0

Enable synchronization of PWM register for the chain:

the values written in PWM register are transferred to

the PWM engine only after that a SYNC command is

received or the SYNC pin is triggered.

hyb

0x0

Must be set to 0

DITHERING_EN

0x0

Enable dithering mode, PWM frequency will be 4 kHz

for PWM values > 8 LSB

11:8

PWM_CURR_RED[3:0]

0x0

This value selects the current output of RED PWM

driver.

Allowed values in normal operation are from 0 to 4.

Values higher than 8 are used only for low current

testing.

7:4

PWM_CURR_GREEN[3:0]

0x0

This value selects the current output of GREEN PWM

driver.

Allowed values in normal operation are from 0 to 4.

Values higher than 8 are used only for low current

testing.

3:0

PWM_CURR_BLUE[3:0]

0x0

This value selects the current output of BLUE PWM

driver.

Allowed values in normal operation are from 0 to 4.

Values higher than 8 are used only for low current

testing.

AS1163 Datasheet(PDF) 78 Page - ams-OSRAM AG

AS1163 Datasheet(HTML) 78 Page - ams-OSRAM AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91

Datasheet Descarga

Enlace URL